NR Slate 50

Code:

SO-50SL-iSR

Opalux® non-reflective Slate 50 gives the glass a very light tint and is mainly used for aesthetic reasons and help reduce the premature fading of interior furnishings.

Very light tint appearance to the glass
Reduces fading of interior furnishings
Aesthetic Tinting

sdsd

Specification

Available Width	1524mm (60”)
Standard Roll Length	30.48m (100’)
Visible Light Transmitted	50%%
Glare Reduction	43%
Total Solar Absorbed	29%
Total Solar Energy Rejected	35%
Film Thickness	35 Micron
Adhesive Type	Pressure-Sensitive
Base Material	Polyester
Warranty	10 years

Description

Opalux® non-reflective Slate 50 gives the glass a very light tint and is ideally suited when a low external reflection is preferred.

It can also provide additional benefits as with most Opalux films, it reduces up to 99% Ultraviolet (UV) filtering. The light non reflective grey tinted appearance gives the glass a very light tint and is mainly used for aesthetic reasons. The film is designed for interior application and, in daytime, lends the glass a light grey/black tinted outside appearance, whilst from the inside the visual effect is hardly noticeable.

The Slate range are great products if you are looking to reduce exposure by a certain amount of light stops. If you are also looking to match a certain Neutral Density, please see the table below:

Filter Code	Description	Light Stop	VLT
298	.15 Neutral Density	1/2	70%
209	.3 Neutral Density	1	50%
210	.6 Neutral Density	2	25%
211	.9 Neutral Density	3	12.50%
299	1.2 Neutral Density	4	6.30%