NR Slate 35

Code:

SO-35SL-iSR

Opalux® non-reflective Slate 35 gives the glass a noticeable tint and is mainly used for aesthetic reasons and help control UV radiation.

Subtle light tint appearance
Creates a uniform outside appearance
Reduces fading of furniture
Provides an aesthetic appearance to the glass

sdsd

Specification

Available Width	1524mm (60”)
Standard Roll Length	30.48m (100’)
Visible Light Transmitted	35%%
Glare Reduction	60%
Total Solar Absorbed	45%
Total Solar Energy Rejected	37%
Film Thickness	35 Micron
Adhesive Type	Pressure-Sensitive
Base Material	Polyester
Warranty	10 years

Description

Opalux® Slate 35 film offers good alleviation of direct glare problems, and is also ideally suited when a low external reflection is preferred.

It can also provide additional benefits such as uniform low reflective external appearance and as with most Opalux films reduces up to 99% ultraviolet light (UV) filtering. The light non reflective grey tinted appearance gives the glass a very light tint and is mainly used for aesthetic reasons. This film is designed for interior application, and, in daytime, lends the glass a light grey/black tinted outside appearance, whilst from the inside the visual effect, much less noticeable, is a light tint.

The Slate range are great products if you are looking to reduce exposure by a certain amount of light stops. If you are also looking to match a certain Neutral Density, please see the table below:

Filter Code	Description	Light Stop	VLT
298	.15 Neutral Density	1/2	70%
209	.3 Neutral Density	1	50%
210	.6 Neutral Density	2	25%
211	.9 Neutral Density	3	12.50%
299	1.2 Neutral Density	4	6.30%