Grey/Silver/Grey, Shade Material window film

Code:

SM-10NG/RS/NG-i

This product is grey in appearance to reduce the visual impact in the room. It also is manufactured with an extra layer of silver metalised polyester between the films to achieve the maximum heat rejection while still giving a low impact appearance to the glass.

Good Solar heat rejection
UV Rejection
Excellent Glare control
Enhanced comfort with fewer hot/cold spots

sdsd

Specification

Available Width	1524mm (60”) 1828mm (72”)
Standard Roll Length	76.2m (250')
Visible Light Transmitted	8%
Glare Reduction	92%
Total Solar Absorbed	57%
Total Solar Energy Rejected	60%
Film Thickness	100 Micron
Warranty	N/A

Description

Shade Material is an excellent alternative to window film, where you may want privacy and sometimes you may not. They allow the natural light to come into the room while still controlling the unwanted heat and glare unlike fabric shades.

Features & Benefits

Test results are produced from film applies to clear glass. Performance data is subject to change without prior notice. Accurate selection of window film requires specialist knowledge, and it is recommended that the specifiers contact the company at the specification stage. It is the users' responsibly to ensure the product is suitable for the intended use. The seller shall not be liable for any direct ir consequential loss howsoever arising.

Add to compare Comparison table

Datasheet download:

SM-10NG_RS_NG-i.pdf